XEM7310-A200 Debugging via JTAG

I have bridged R46 on the XEM7310-A200 so it is powered from USB only. I need to use an external debugger so I have bought the BRK7010 board and I have a JTAG module from Digilent. Can this system be powered as is with the USB supplying power for everything? Right now it does not seem to work.

Well, that depends.

See the documentation here (section 1.1.3):

So basically you suggest to remove the jumper, try to apply 5V and see if that solves the problem?

I tried using an external power supply, didn’t work either.

First, what is R46 and why has it been bridged?

Second, what does “it does not work” mean?

I got the resistor designator wrong, it is actually R62.
I have a project on Vitis, when trying to debug I get an error saying the Cannot stop MicroBlaze, Processor held in reset. Right now I am trying with a minimal project to see if it still does not work or is it that specific project.