JTAG connection question


I have the Xilinx Parallel to JTAG interface cable made by Digilentinc and want to connect to the XEM3010. The cable indicates that the voltage is 2.8V up to 5V. The XEM3010 documentation shows 2.5V.

  1. Will this cable work with the XEM3010?

  2. If not what can I do to make it work?

Thanks in advance.



I have what Xilinx calls the Parallel III cable. I connected it to the XEM3010 board and it functions fine using 2.5V from the XEM board. I hope this helps someone else.